Ohio State Prospectors Association

Here's the list...
1) 2" ID suction hose
2) 2.5" ID suction hose (Perferably no more than 10 feet)
3) 4" ID suction hose (Perferably 15 feet depending on engine hp)
4) Foot Valve that fits the 2.5" ID suction hose
5) Suction Nozzle or Power Jet and Hose Tip for 4" ID suction hose and 2" ID discharge hose
6) 4" oversized jet flare with 16" width at discharge end
7) 5.5hp to 6.5hp engine with 5/8" threaded shaft with or without p-180 pump.
8) P-180 pump

If any of you have any of the above please let me know! The prices dont need to be cheap but reasonably priced for their condition.

Thanks a bunch!!

Shot you a PM

[quote="Flourchild"]Shot you a PM[/quote]

Got it! Sent one back your way!

I purchased the engine last night. I now need the P-180 pump along with all the other stuff on my list.

Just thought i'd update ya!

I was just offered a deal I could not refuse. I dont need any other used gear unless someone happens to have a 1/2 inch grizzly classifier for a 3" highbanker/combo floating around.

Thanks a bunch!!

Got the Grizzly!! Thanks everyone!